Cookie-Einstellungen
Diese Website benutzt Cookies, die für den technischen Betrieb der Website erforderlich sind und stets gesetzt werden. Andere Cookies, die den Komfort bei Benutzung dieser Website erhöhen, der Direktwerbung dienen oder die Interaktion mit anderen Websites und sozialen Netzwerken vereinfachen sollen, werden nur mit Ihrer Zustimmung gesetzt.
Konfiguration
Technisch erforderlich
Diese Cookies sind für die Grundfunktionen des Shops notwendig.
Alle Cookies ablehnen
Alle Cookies annehmen
Ausgewählter Shop
CSRF-Token
Cookie-Einstellungen
Individuelle Preise
Kunden-Wiedererkennung
Kundenspezifisches Caching
Session
Währungswechsel
Komfortfunktionen
Diese Cookies werden genutzt um das Einkaufserlebnis noch ansprechender zu gestalten, beispielsweise für die Wiedererkennung des Besuchers.
Merkzettel
Statistik & Tracking
Endgeräteerkennung
Partnerprogramm
SPCA210.100 2-Door expander
Vennligst logg inn for å se priser.
Ikke en Vanderbilt kunde? Ikke noe problem, du kan registrere deg her.
Behøver du en Vanderbilt produktinstallatør ? klikk her
Ikke en Vanderbilt kunde? Ikke noe problem, du kan registrere deg her.
Behøver du en Vanderbilt produktinstallatør ? klikk her
- Produkt-nr.: V54547-A101-A100
- EAN/UPC Strekkode: 4025515471189
Produktinformasjon "SPCA210.100 2-Door expander"
The SPCA210.100 2-door expander extends the SPC controller with advanced door control functionality for 2 entry doors or 1
entry/exit door. The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / valid per reader), 4 zones (1
position- and 1 opening switch per door), 2 relay outputs (1 lock per door) and an on-board buzzer to signal "door open too long" events.To allow greatest flexibility, the zones and outputs are freely programmable for other purposes if not used for door
control. Up to 512 priority card holders can be stored on the expander for standalone operation in case of communication loss to
the control panel. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and
on-board buzzer for easy device identification and extensive self-diagnostic capabilities.
- Certificate (CE) - Issued by Vanderbilt, on 06/02/2019
- Certificate - Issued by INCERT, on 09/05/2022
- Certificate - Issued by VdS, on 07/11/2019
- Certificate - Issued by VdS, on 28/06/2021
- Certificate - Issued by VdS, on 07/11/2019
- Certificate - Issued by VSÖ, on 17/09/2018
- Certificate - Issued by KVALITET, on 06/05/2019
Tamper switch: | Ja |
Approval: | CH: FFIS bis Kat. 1 |
Weight: | 0.360 kg |
Operating current: | Max. 80 mA at 12 VDC (all relays activated) |
Tamper contact: | Front spring tamper |
Interfaces: | X-BUS (in, out, branch), Reader 1, Reader 2 |
LED Indicators: | 4 outputs (1 void and 1 valid per reader) |
Number of on-board relays: | 2, for door locks or freely programmable (single-pole changeover, 30 VDC / max. 1 A resistive switching current) |
EOL resistor: | Dual 4k7 (default), other resistor combinations configurable |
Number of on-board zones: | 4, for door release switch (DRS) and door position switch (DPS), or freely programmable |
Housing: | Plastic housing (ABS) |
Colour: | RAL 9003 (signal white) |
Mounting: | Flat surface, wall-mounted |
Quiescent current: | Max. 45 mA at 12 VDC |
Operating voltage: | 9.5 ~ 14 VDC |
Operating temperature: | -10 ~ +50 °C |
Dimensions (W x H x D): | 200 x 153 x 47 mm (housing), 150 x 82 x 20 mm (PCB) |