SPCE651.100 Expander,8 In/2 Out, Analy.

Vennligst logg inn for å se priser.
Ikke en Vanderbilt kunde? Ikke noe problem, du kan registrere deg her.
Behøver du en Vanderbilt produktinstallatør ? klikk her
  • V54542-F102-A100
  • 4025515470823
Produktinformasjon "SPCE651.100 Expander,8 In/2 Out, Analy."
The SPCE651.100 expander extends the SPC system via X-BUS with 8 analysed zones and 2 fully programmable relay outputs. Analysed zones allow to connect inertia sensors. The zones and outputs on the expander function exactly as the zones and outputs on the SPC panel. Each zone can be configured for different zone monitoring requirements. The outputs are volt free relays that provide both NO and NC terminals allowing the greatest flexibility. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and on-board buzzer for easy device identification and extensive self-diagnostic capabilities.
Bruttovekt (KG) 0.48
Kjøp enhet PCE
EAN/UPC Strekkode: 4025515470823
Mindestabnahme 1
ECCN N
Materialkode V54542-F102-A100
Statistisk kode 85311030
Netto vekt 0.456
Opprinnelsesland PH
Operating temperature: -10 ~ +50 °C
Approval:
Weight: 0.350 kg
Number of on-board relays: 2 (single-pole changeover, 30 VDC / max. 1 A resistive switching current)
Number of on-board zones: 8 (analysed)
Quiescent current: Max. 40 mA at 12 VDC
Operating current: Max. 80 mA at 12 VDC (all relays activated)
Interfaces: X-BUS (in, out, branch)
Tamper contact: Front spring tamper
EOL resistor: Dual 4k7 (default), other resistor combinations configurable
Housing: Plastic housing (ABS)
Colour: RAL 9003 (signal white)
Mounting: Flat surface, wall-mounted
Operating voltage: 9.5 ~ 14 VDC
Dimensions (W x H x D): 200 x 153 x 47 (mm) (housing),150 x 82 x 20 (mm) (PCB)
PDM-I12  PIR detector PDM-I12 PIR detector
V54530-F114-A100
PDM-I12  PIR detector PDM-I12 PIR detector
V54530-F114-A100
PSU6 PSU6
MULTI-ACC-UL-PSU6
PSU2-ENC PSU2-ENC
ACCESS-UL-PSU2-ENC