Tuotteet Vanderbilt
Tällä suodatuksella ei löytynyt mitään tietoja!
IRRM 3 Relay card
N54592-Z144-A100
2 change over contacts with a high impedance input to control the relay. If the control input is connected to minus the relay is
energised and a LED indicate. IRRM3 has a 3 input terminal block. Relay driving circuit provides wide supply...
KPD102 Junction Box
N54592-Z147-A100
Kopplingsdosa med sabotagekontakt och 12 st skruvplintar varav 2 st är sabotagekontakt.
KPD202 Junction Box
N54592-Z148-A100
Kopplingsdosa med 20-polig skruvplint + 2 för sab, skruvplint, sabotagekontakt med mikrobrytare
KPD2010 Junction Box
N54592-Z149-A100
KPD 2010 är en kopplingsdosa som kan användas för avsäkring, fördelning och separation av strömmatningen till noder och lås i en
Bewator 2010 Omnis installation. Kopplingsdosan är speciellt framtagen för anslutning av Bewator 2010 Omnis...
HTF-24E Heater. 24V/DC, 2pcs/Set
NBPZ:5386110001
For use with IS443, IS444 and IS445 in severe weather conditions (snow, frost)
BP-200F Pole mounting cover. 2pcs
NBPZ:5386240001
Special cover designed to weatherproof IS443, IS444 and IS445 beams when mounted on round poles outside.
BP-60TE Pole mounting cover. 2pcs
NBPZ:5386370001
Special cover designed to weatherproof IS433, IS434 and IS435 beams when mounted on round poles outside.
HFS-TS Keyring tag for ISE/TSE-HF(5pcs)
NDE6:9908950013
Festprogrammierter Transponder als Schlüsselanhänger für die Identifizierung durch ISE Light, ISE Basis und ISE Plus oder TSE
Basis. Ohne eigene Energieversorgung. Informationsübertragung erfolgt berührungslos. Eindeutige Codierung aus...
PBH Heating unit for IS 43X
NSE2:PB-H
For use with IS433, IS434 and IS435 in severe weather conditions (snow, frost)
SOCKEL RÖD Hög Sockel, Röd
NSE2:SOCKEL-ROD
The bayonet base has been designed to allow a common mounting. The deep base cater for surface wiring of all types and provides
ingress protection up to IP65.
Knockouts for 2 x 20mm Ø entries at 180º. Single 20mm entry may be drilled at...
ACTpro-Kone Integration License
P54508-P120-A100
Software license to enable Kone Integration into ACTpro.
Destination Operation Panels (DOP) are located outside the lift system.
The user swipes their card against the reader located inside the panel
and a message is passed to the Kone...