SPCA210.100 2-Door expander
Please log in to see pricing.
Not a Vanderbilt customer? No problem, you can register here.
Need a Vanderbilt product installer? click here
Not a Vanderbilt customer? No problem, you can register here.
Need a Vanderbilt product installer? click here
in stock
Ready to ship
Delivery time appr. 1-3 workdays
- Article number: V54547-A101-A100
- EAN/UPC-Code: 4025515471189
Product information "SPCA210.100 2-Door expander"
The SPCA210.100 2-door expander extends the SPC controller with advanced door control functionality for 2 entry doors or 1
entry/exit door. The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / valid per reader), 4 zones (1
position- and 1 opening switch per door), 2 relay outputs (1 lock per door) and an on-board buzzer to signal "door open too long"
events.To allow greatest flexibility, the zones and outputs are freely programmable for other purposes if not used for door
control. Up to 512 priority card holders can be stored on the expander for standalone operation in case of communication loss to
the control panel. The expander comes in a plastic housing with front tamper protection and features also an X-BUS status LED and
on-board buzzer for easy device identification and extensive self-diagnostic capabilities.
Operating temperature: | -10 ~ +50 °C |
Weight: | 0.360 kg |
Operating current: | Max. 80 mA at 12 VDC (all relays activated) |
Tamper contact: | Front spring tamper |
Interfaces: | X-BUS (in, out, branch), Reader 1, Reader 2 |
LED Indicators: | 4 outputs (1 void and 1 valid per reader) |
Number of on-board relays: | 2, for door locks or freely programmable (single-pole changeover, 30 VDC / max. 1 A resistive switching current) |
EOL resistor: | Dual 4k7 (default), other resistor combinations configurable |
Number of on-board zones: | 4, for door release switch (DRS) and door position switch (DPS), or freely programmable |
Housing: | Plastic housing (ABS) |
Colour: | RAL 9003 (signal white) |
Mounting: | Flat surface, wall-mounted |
Quiescent current: | Max. 45 mA at 12 VDC |
Operating voltage: | 9.5 ~ 14 VDC |
Tamper switch: | Ja |
Approval: | CH: FFIS bis Kat. 1 |